Advantages

Self Cleaning Function

Plasmacluster Ions minimize the growth of mold
inside the air conditioner.

While air blow and dry operations are performed for about 40 minutes, Plasmacluster Ions are blown through the interior of indoor equipment. This prevents odor-causing mold from growing on the surface of the heat exchanger.

Test method: Measurements taken at SHARP’s laboratory using the AY-P28XC model (Japanese model). At an outdoor/room temp. of 27°C and humidity of 70%, a cycle consisting of one hour of cooling operation, 40 minutes of internal cleaning, and 20 minutes off was conducted for 14 days (40 cycles).

4 Way Swing

Automatic control of the horizontal air flow, vertical, lateral left and right side is available to make a uniformly warm or cold room.

*Hot Gas Pipe System (Patented)

The outdoor units of THU Series were designed to provide heat comforting to -27 ° C or to lower temperatures than any other model on the market . Through the SHARP’s Hot Gas Pipe System, condensation holes are always free from ice and ensure a smooth flow during defrosts without affecting the energy efficiency.

Optimal Drainage Holes

With conventional air conditioners, malfunctions in winter are often caused by water freezing in the outdoor unit. To prevent this, SHARP outdoor units incorporate numerous large drain holes in the base pan to improve drainage. Caps to cover these holes are also included with the product to facilitate the use of the units in warm climates where water is drained out via a drain hose.

Frost Melter

When the heat exchanger is used to defrost the outdoor unit, war gas is channeled to the area near the base pan of the heat exchanger. This prevents drain water from freezing and allows expelled water to be drained easily from the holes in the base pan.

Anti-Corrosion Coating

A special anti-corrosion coating is applied to the heat exchanger, control board, and other key components in the outdoor unit to promote a longer product life.